2 wheel OFFROADERS TIPS

The first time before going off road we have to prepare the motorcycle to prime condition and also control the position of the bike so we feel comfortable at the time of ride. Position of motorcycle controls include position handlebar, front brake handle, the handle clutch, rear brake pedal, all we can customize to how to sit on the bike and felt comfortable position desired by us.
Once and it should always check the tire pressure of the wind on a motorcycle shall we drove, at the time of off-road course we will meet a variety of channels, below tipos be some we can do now to offroad 

1. Rise
When we see the road that climbed better position our bodies lean forward and maintain engine rpm at a slightly higher rpm. The position of our bodies lean forward to counterbalance the position of the front wheel higher than beakang wheel, also keep the front wheels are not lifted and can result in reverse to the back of a motorcycle 

2. DERIVATIVES 

We should find a way that decreases our sitting position is more backward and keep the engine speed in rpm rather low and try to use the lower the transmission position. To maintain the balance we have to use front and rear brake to keep the center increased the speed decreases. Sitting position is a bit backwards to compensate for the rear wheels which are located on the front wheel, also keep the rear wheels are not lifted, and could cause the motorcycle backwards into the future.
Source:http://trabasinfo.multiply.com